Services

With a 24-hour, 7-days a week local HYTORC Service Facility near you, field support and free consultation is just a phone call away, anywhere in the world!


Hire

An extensive range of hire stock is available to meet all your needs. Rental is ideal for those who require equipment for short periods of time. Special rates are available for longer-term hires. We offer a same day delivery service or next day timed deliveries to accommodate your needs. 

Free After Sale Service

You are entitled to the following FREE Services with the Purchase of HYTORC products:

  • FREE User-Safety-Training upon Receipt of Merchandise
  • FREE Semi-Annual User-Tools in case of product failure under warrantee
  • FREE Torque/Tension Consultation/Seminar
  • FREE Half Day, First Use Supervision
  • FREE Annual Product Inspection on Request
  • FREE Product Demonstration

Repairs

  • All warranty repairs are FREE of all charges, including return freight. (HYTORC warranty is 12 months, no questions asked.)
  • All repairs are guaranteed for 6 months
  • All parts replaced with new ones will be returned to customer for inspection
  • If your HYTORC equipment cannot be repaired on site, FREE loan equipment will be made available to you upon request, while under warranty.

 

Rental Policy

  • You can rent the necessary equipment for any job on a daily, weekly, or monthly basis.
  • You can rent over a 12 month period.
  • You can lease the tools over 24 months interest-free and release new tools thereafter.
  • You can rent to own over a 24 month period. The rates are adjusted to include a final payment according to the book value of the tools.
  • We offer a same day delivery service or next day timed deliveries to accommodate your needs.


All accessories can be rented, except for the LoaDisc or CLAMP. They will have to be purchased but come with a free first job supervision of your crew or contractor to cut bolting in half, to assure safety and job reliability with our Money-back Guarantee!

 

Safety Notice


FOR OPERATION OF ALL BRANDS OF HYDRAULIC TORQUE TOOLS

  • Power Tools should only be operated with.... Hard Hat, Safety Gloves, Goggles, Steel-Toe Boots, Ear Plugs and without loose clothing.
  • Hands-Off - Hydraulic Torque Tools. If at all feasible stay distant from tool under pressure or hold handle in a safe position!
  • Unless there is CLEAR Communication - Tool Operator Operates the Pump!!!

 

BEFORE USING HYDRAULIC TORQUE TOOLS, PLEASE RUN THESE SAFETY TESTS:

  • Pressurise the tool on the ground and cycle it several times at maximum pressure to check tool, hoses and pump for function and leaks. Replace hose and fix tool or pump in case of leak or functioning irregularities prior to use.
  • Check tool and reaction arm for cracks and badly worn areas and replace if so.
  • Check socket for cracks and badly worn areas and replace if so.
  • Check backup wrench for cracks and badly worn areas and replace if so.

PLEASE STAY DISTANT FROM TOOL HOSES AND PUMP DURING SAFETY TEST.

TOOL SETUP:

Assure tight screw-connectors (without gap). Set required pump pressure with tool connected. Firmly connect socket to drive. For Tool Set-up loosen screw connectors half a turn if pump operator is distant from job to avoid inadvertent start-up while handling the tool. Re-tighten thereafter.

REACTION ARM SETTING:

The reaction arm of the tool should be placed in the same direction as the drive whenever possible so as to about firmly against the adjacent nut or the casing. Please test by placing tool on the nut, apply pressure to make sure reaction is firm and tool does not rise. If it does, reset the reaction arm.

TOOL HOLDING:

On vertical or inverted applications, please hold tool so that even if there is a failure of tool or socket that you are out of harm's way. On horizontal applications, take hands-off when tool is in use! Request supplier to give you free user training prior to first use! Or call 01670 363800

NEVER...

  • Never hold the tool on connectors or swivel during operation!
  • Never place the tool on job without partially disconnecting both hoses when pump operator is out of sight.
  • Never use leaking tools or hoses!
  • Never have your face close to the socket during operation!
  • Never place your hand on reaction arm or swivel when pump is operating!
  • Never place your hand on operating tool if not absolutely necessary!
  • Never use altered, heavily used, damaged or chrome sockets!